Megarevo 100kW 3-Phase Hybrid Microgrid Inverter

The Megarevo 100kW three-phase hybrid inverter is a true microgrid power conversion system engineered for large commercial, industrial, and utility-scale energy installations. Unlike conventional hybrid inverters that are optimised for building-level backup, this unit is designed to operate as the central power controller in complex microgrids where multiple energy sources and heavy loads must be managed simultaneously.

This inverter is built for continuous operation under high load and is suitable for factories, mines, farms, data infrastructure, industrial estates, islanded microgrids, military facilities, and mission-critical power systems where grid availability is limited or unreliable.

Megarevo 100kW Microgrid Operating Role

At system level, the Megarevo 100kW inverter controls how power is generated, stored, distributed, and stabilised across the entire electrical network. It supports simultaneous connection of solar PV, high-voltage battery storage, the utility grid, diesel generators, and site loads.

The inverter continuously monitors power availability, battery state of charge, generator status, grid conditions, and load demand across all three phases. Based on programmed priorities and EMS commands, it dynamically decides how power should flow through the system in real time.

This makes the inverter a **power management controller**, not just an inverter.

True Three-Phase Power with Isolation Transformer

The Megarevo 100kW inverter delivers true three-phase output at 400 V and includes a built-in isolation transformer. This transformer significantly improves load adaptability, fault tolerance, and electrical safety, particularly in industrial environments with harsh electrical conditions or sensitive equipment.

The inverter supports both on-grid and off-grid operation with seamless switching, allowing uninterrupted supply to loads during grid failures or generator transitions.

High-Voltage Battery System Architecture

This inverter is designed exclusively for high-voltage battery systems and does not support low-voltage or 48 V batteries. The supported battery voltage range for the 100 kW model is approximately 420 V to 850 V.

High-voltage operation reduces current flow, improves system efficiency, and enables large battery banks to be deployed safely for long-duration backup, peak shaving, or full off-grid operation. Battery communication via CAN and RS485 allows full coordination with the battery management system for protection, charge control, and fault handling.

Solar PV Integration and Modular MPPT Design

The Megarevo 100kW inverter supports PV input voltages up to 1000 V DC and allows very large PV arrays to be connected. Maximum PV capacity depends on configuration and can reach up to approximately 240 kW for the 100 kW model.

The PV controller is modular, allowing the system to be expanded as solar capacity grows. Multiple MPPT channels allow independent control of different PV arrays, improving energy harvest in complex installations with varying orientations or shading.

Grid Interaction, Diesel Generator Support, and EMS Control

The inverter supports full interaction with the utility grid and diesel generators simultaneously. It can operate in grid-connected mode, islanded mode, or fully off-grid mode, with smooth transitions between operating states.

A built-in maintenance bypass switch improves system availability by allowing service without full system shutdown. When integrated with an external Energy Management System, the inverter provides real-time monitoring, forecasting of battery capacity, and discharge time prediction.

Backup Performance and Load Stability

During grid failure, the Megarevo 100kW inverter maintains uninterrupted power to connected loads. It supports long-term overload operation at 110% rated power and delivers low harmonic distortion, protecting sensitive and inductive equipment.

This makes it suitable for systems with motors, compressors, pumps, production machinery, and nonlinear industrial loads.

Thermal Design and Industrial Reliability

The inverter uses intelligent air cooling and is designed to operate in ambient temperatures from -30°C to +55°C. It supports operation at altitudes up to 5000 m with derating above 3000 m.

Redundant internal systems and comprehensive protection functions ensure reliable long-term operation in demanding environments.

Technical Specifications – Megarevo 100kW Hybrid Microgrid Inverter

AC Output (On-Grid and Off-Grid)

• Rated power: 100 kW
• Maximum output power: 110 kVA
• Rated voltage: 400 V
• Voltage range: 320 – 460 V
• Rated frequency: 50 / 60 Hz
• THDi: <3%
• Overload capacity: 110% long-term

Battery System

• Battery type: High-voltage lithium systems
• Battery voltage range: 420 – 850 V
• Maximum charging power: up to 240 kW (configuration dependent)
• BMS communication: CAN, RS485

Solar PV Input

• Maximum PV input voltage: 1000 V DC
• Maximum PV power: up to 240 kW (configuration dependent)
• MPPT voltage range: 250 – 850 V

Physical and Environmental

• Cooling: Intelligent air cooling
• Ingress protection: IP20 (indoor installation)
• Operating temperature: -30°C to +55°C
• Noise level: <70 dB
• Dimensions: 1200 × 800 × 2050 mm
• Weight: approximately 1120 – 1180 kg (configuration dependent)

Warranty

Manufacturer warranty: 5-Year